Swaging Machine to Preset Ferrules Onto Tubing | Model PS20
Model #: 21458-504
Bench Mounted Automatic Crimping & Pre-Swaging Machine For Tube Fabrication
The PS20 is a bench-mounted high volume swaging machine designed to preset ferrules onto a single piece of tubing. Winton Machine’s swagers allow your operation to drastically reduce cycles, saving time and increasing safety.
The swager makes use of a concentric guided motion that draws down on the nut forcing the ferrule(s) into the presetting body. Each preset body comes with a build-in hard stop that sets the depth so that each crimp is consistent, part to part and lot to lot.
Product Video & Details
Customers using Internet Explorer may have difficulty viewing the online training videos.
We suggest using Chrome, Safari, Microsoft Edge, or another modern internet browser to view our videos. To find out more about the system requirements to view our training videos, and to see if your device meets them, click here.
Safety
Product Information
- All pneumatic device most often used to preset ferrules onto a stainless steel tube
- Interchangeable tooling allows for manufacturing flexibility
- A hard stop prevents the system from over crimping a ferrule assembly
- Consistent presetting – hour after hour, day after day
- Easy access cycle start switch
- Bench-mounted
- Change over from one size to another in < 30 seconds
- Optional on touch auto-cycle start switch available (120 VAC required)
- Optional floor stand available
- Optional low air pressure alarm (120 VAC required)
- Optional dual palm start switches available (120 VAC required)
- All assembly documentation included
Specs & Equipment
Weight (w/2 stage pneumatic power) | 64 lbs. |
Dimensions (L x W x H) | 10” x 8” x 19-1/4” |
Air pressure required | 80 PSI |
Capacity, 2 stage cylinder (base unit) | Ø1/2” x .065” wall SS Ø3/4 “x .028” wall aluminum |
Capacity, 4 stage cylinder (optional) | Ø3/4” x .065” wall SS |
Typical cycle time | 3 seconds |