Angle Measuring Device for Semi-Rigid Coax Bend Angle Measurement and Inspection

This is the AM 40 measuring device, and what it does is it measures bend angles, is what's primarily designed for, is a bend angle measurement. And so you have this arm that's dynamic, it can rotate and as it rotates, you can see the display here moving. You bring the two arms together, you hit reset. It's calibrated, right? And so there would be to 90 degrees and then you close to 0 degrees all the here Every time you bring the arms back, it should be, say, 180, right? And every time you hit reset, it resets, it, bring the two arms together, at reset, it's calibrated, so It's great for coax cable, right? We can bring in a piece of a semi rigid coax cable, and we can measure a bend angle, something that's something similar to that. And you can always put a block under it and raise it up. And you can look at your bend angle, maybe a at a different light, and it's all good, right? Let's see you have a shallow bend angle, right. And it allows you to see your measurement over here as well, right? And so over here, similar piece of a semi rigid coax cable. It's a measure of bend angle. You can see the bend angle there as I try to get the dynamic arm parallel to the one leg there, so you get an accurate measurement. It's great for spring back, understanding spring back, and you're setting up a tube or a wire bending machine or a table bending machine. It's excellent for that. And so as far as industries that would use this would be building coax, semi rigid coax cable for most often a commercial and defense related industry. So it's a great way to get spring back calculation. It's a great way to get a quick measurement bend angle It's not a CMN. can measure a lot of different parts. It's just that sometimes you got to maybe a machine a trough in here to have the bend go out through it. Nothing wrong with that, you can machine rated that these blocks right here. And so this is the AM40 angle measuring device. From prototype to full production, Winton provides the equipment to bend, cut, strip, point, and precisely measure semi-rigid coaxial cable. Our American-made solutions are ideal for aerospace, defense, satellite communications, RF, and microwave electronics, medical technology, and other high reliability applications When precision matters, build it with Winton. Contact us today at WintonMachine.com.