Tube Fabrication Systems

This CNC tube bending machine integrates a tube cutting machine, tube bending machine, and End Former into one single machine.
Model #: 21450-506
WATCH VIDEO »
View Product

50mm Dual Stack Extrusion CNC Tube Bender designed to make consecutive CW and/or CCW bends in a single work piece
Model #: 21350
WATCH VIDEO »
View Product

This particular hopper loader interfaces with either a CNC Rotary bender or End former. This automatic loader is best when utilized in conjunction with a robot. Winton can also manufacture the loader to include transfer arms so that a robot is not needed. Automatic loaders enable a machine to run automatically which permits increased productivity by saving time, and ultimately saving money.
Model #:
View Product

Mandrel extractor used to extact a plug mandrel during a hose/fitting crimping operation
Model #: 21430
WATCH VIDEO »
View Product

This 2 axis cnc machine is used to form the spine on the OD of an exising tube
Model #: 21431
WATCH VIDEO »
View Product

This tube fabrication system bends tubing, punches and crimps tubes, as well as loads and unloads the tubes for a fully automated process.
Model #: 21436-503-and-21437-503
WATCH VIDEO »
View Product

This machine cuts bellows for the Automotive, Heavy Duty off road equipment, and Aerospace industries.
Model #: 21444-505
WATCH VIDEO »
View Product

Automatic tube and pipe cutting machine with a tube and pipe chamfering attachment.
Model #: 21390-501-and-21456-505
WATCH VIDEO »
View Product

The Crimp Meister is used to pre-install fittings on lubrication lines which in turn reduces the time at final assembly.
Model #: 21458-505
WATCH VIDEO »
View Product